![]() If the program does not recognize the programming cable or the COM Port assigned to it, refer to the manufacturer of the programming software. Run or close and restart the programming software. If a new COM Port number was assigned to the cable and it is still not recognized by your programming software, skip to Step 6.Note the new COM Port number assigned to the USB Programming Cable and go back to Step 3.Click OK to save the setting, then click OK again to exit the Communications Port (COMX) properties window.Click the drop down list next to COM Port Number: and choose a COM Port below the number 10 that is not in use.Open the Device Manager, go to Ports (COM & LPT) and right click on the listing for the USB programming cable.Assign another COM Port to the USB programming cable. If the COM port assigned to the programming cable is NOT listed as available, go to Step 4.If the COM port assigned to the programming cable is listed as active and available, choose it and skip to Step 5. ![]() ![]() Verify the correct COM Port is recognized and listed as active in the programming software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |